Glass Railing Systems

Origin Architectural

Origin Sabco System

Origin Sabco is a frameless glass balustrade system that is new to the market. It has a sleek finish which can be used in all applications. The advantages of Origin Sabco include  removable covers to avoid the channel being damaged either during installation or in transit. Covers are simply fitted at the end of the installation. It is ready for use with LED strip lighting. By incorporating a 12mm x 3mm housing into the bottom of the clamps, LED lighting can be added to the system with ease.

Our Sabco Products

2.5m Base drilled channel & glass kit
From £187.50
2.5m Side drilled channel & glass kit
From £215.00
 
Connecting pins
From £4.00
End cap
From £5.00
 
Glass panel spacer
From £8.00
Top cover plate
From £15.00
 
Torx screw driver bit
From £

Installation 


Origin Sabco only requires 400mm fixing centres to achieve the 1.5Kn rating, saving valuable time on site. It uses self levelling clamps which are tightened with Torx screws using an electric screwdriver. It allows for easy alignment of the glass during installation with up to +/- 15mm adjustment available either side at 1100mm high.
 

Test Data 


All of our channel systems are supplied in strict compliance with all safety load bearing requirements. The relevant test certification can be provided on request with every order. The load bearing ratings for railing systems are set out in the British standard BS EN6180:2011. This specifies the Kn per meter that the balustrade is required to withstand without exceeding deflection of more than 25mm. The structural performance of a balustrade varies depending on the use and occupancy level of the building concerned. Advice should always be sort from a structural engineer, particularly when fixing on to concrete. 

View Test Data

Speak to
the specialists
 


Unit 7 Parkside Industrial Estate, Glover Way, Leeds LS11 5JP
T/+44 (0)113 2774316